A car that brakes well and brakes correctly are just as important as acceleration, handling, or any other aspect of a vehicle’s drivability. A car with brake issues has the potential to be a far more enjoyable ride when fixed. Your brakes have a lot to do with how your car drives. Brakes are a frequently neglected item on a lot of people’s checklists, and many drivers on the road have subpar brakes and don’t even know it.
There are a few signs that indicate you need brake work. There are five main problems a driver may encounter, and different solutions to each issue. Scheer Automotive in Edmond has seen them all, and our mechanics are ready to assist in any of these issues apply to you.
“Spongey” Brakes describe brakes that feel too soft or springy when the pedal is pressed. The problem here is that the driver has to mash the brake pedal harder and push it down further, to make the car stop. If this is applicable to your situation, you may also have noticed that the brakes will work better if you pump the pedal a few times. This issue is not only irritating, but it's also hazardous. Vehicles with this issue stop more slowly and require far more effort to stop. Spongey brakes are caused by air in the system or a bad master cylinder.
Pulling to One Side While Braking If you find yourself fighting your steering wheel when you hit the brakes, it’s time for new brake calipers. If the brakes on one wheel are grabbing too hard or not hard enough, it can make the car take off to one side when you hit the brake pedal. Bad calipers are also often responsible for dragging brake pads.
Sticking Brakes means your brakes do not loosen when you release the pedal. Even though they usually look fine, a brake hose may have collapsed internally. This generally results in the hose allowing fluid through the hose when the brake is pressed, since it’s under pressure, but not back through when the pedal is released, causing the brakes to stick. New hoses and a brake bleed will remedy this situation.
Brake Pad Noise can be caused by a variety of things; broken clips, pads that have been run down to the metal, or sticking calipers. If they make noise constantly, the problem is one of those things. If they only make noise when you brake, but the brakes still feel fine, it’s just your brake wear indicator doing its job. That noise is to warn you that your brake pads are worn down, and it’s time to change them before they do any damage to other parts.
Vehicle Shakes or Pulsating in the Pedal when you hit the brakes, you have a warped rotor. It either got too hot or was exposed to brake pads that needed to be replaced long ago. Sometimes you can have a rotor “turned” to straighten it out, but anymore it’s about as cost-effective to just buy a new one. If you need to replace a rotor, go ahead and replace the pads too. If a warped rotor caused the pads to wear unevenly, they’ll be more trouble than they are worth down the road.
Your brake system is composed of a variety of parts that work harmoniously together. When one part of the system fails, it will cause other parts to fail as well, if not addressed appropriately when something goes wrong initially. Whether your brakes just started acting up or you realize now that you have definitely let a problem go too far, we have good news; Scheer Automotive can fix it. Call us or come see us soon!
_________________
Thank you for visiting Scheer Automotive in Edmond, OK. Count on our automotive repair technicians to keep your car, truck, suv, or van on the roads longer and safer.
Schedule your appointment today CALL: (405) 330-4810
